Mobile:86-18680475290
Tel:86-577-61670617
Fax:86-577-62051190
Web:www.lbaji.com
 |
- product name : HL30-3P Isolator
- product brand : LBAJI
- Place of Origin : CHINA
- E-mail : sales@labji.com
- Online Contact :
Scope of Application
HL30-100 series disconnector/isolator (HL30 isolator) is applied to power distribution and control circuits of AC 50Hz/60Hz, rated voltage 230V or 400V and below, rated current up to 100A, offer non-loaded connecting& breaking with the power supply. It is widely used as master switch of terminal apparatus and also can used to disconnect & control all kinds of motors, appliances and lighting with small power. Its mechanical life is 10000 times, while electrical life is 6000 times.
HL30 isolator complies with Standard GB14048.3and IEC947-3.
Normal Operating Conditions
◆ Ambient air temperature: -5℃~+40℃. Average temperature is no more than +35℃.
◆ Altitude： ≤2000m
◆ When ambient air temperature is up to 40℃, the relative air humidity can not exceed 50%. The maximum RH could reach to 90%.
◆ Pollution degree: level II.
◆ Utilization category: AC-22A
◆ Mounting method: TH35-7.5 type din-rail mounted. The installation tilt angle against vertical surface should no more than 5°.
Main Technical Parameters
|
Rated current（A） |
32、63、100 |
|
Number of poles（P） |
1、2、3、4 |
|
Rated operating voltage（V） |
Single phase 230 |
|
Three-phase 400 | |
|
Rated short-time withstand current |
12le, conduction time: 1s |
|
Rated short circuit making capacity |
20le，conduction time: 0.1s |
|
Rated switching on and breaking capacity |
3le，1.05Ue，cosφ=0.65 |
|
Operating performance |
No-load 8500 times，on-load 1500times.10000 times in total |